Home
My Geoworks

Tough-Cell

Tough-Cell 150mm Cell Height, 2.5m x 8.0m expanded cell size, 330mm distance between weld seams

Specification

Stock code Description My Geoworks Downloads
GC/TOUGH/150/330 Tough-Cell 150mm Cell Height, 2.5m x 8.0m expanded cell size, 330mm distance between weld seams

Images

Specification

General information

Stock code
GC/TOUGH/150/330
Range
Tough-Cell

Cell & Section Nominal Dimensions

Distance between weld seams
330 mm
Cell wall heights
150 mm
Cell length
245 mm
Cell width
210 mm
Number of cells per m2
40
Standard section size (expanded)
2.5 x 8.0m

System Physical Properties

Cell Wall Surface Texture
Cell wall surface is textured for internal friction efficiency
Distance between Weld Seams (±2.5%)
330.00 mm
Traceability
Each section marked for full detailed traceability

Dimensional Stability (±5%)

≤ 135

Seam Weld Properties (±7%)

Seam weld strength - Weld splitting
> 19 kN/m

Tensile Properties (±7%)

Strength at yield - perforated (Width-width)
> 19 kN/m

Photochemical and Oxidation Durability

Resistance to UV degradation (UV and oxidation resistance)
≥ 1600 minutes

Dynamic (Elastic Stiffness) Modulus

Dynamic Mechanical Analysis (DMA) at sample elevated temperature +30° C
≥ 1250 MPa
Dynamic Mechanical Analysis (DMA) at sample elevated temperature +45° C
> 1000 MPa
Dynamic Mechanical Analysis (DMA) at sample elevated temperature +60° C
> 750 MPa
Brittle temperature
≤ Minus 70°C
  1. Geoworks (trading as Wrekin Products Ltd.) continually seeks to improve its products and, therefore, reserves the right to alter product specifications without prior notice.
  2. It is the responsibility of all users to satisfy themselves the above data is current.
  3. Installation details are available in the knowledge base.
  4. All Geoworks products are supplied subject to our terms and conditions of sale.
  5. Some imagery within our materials is illustrative in nature and may not depict the exact product supplied.
Share this page