Home
My Geoworks
Geosynthetics being used on construction site

Understanding key geogrid attributes

Key geogrid attributes

Attribute Product   Description
Height of rib A higher rib height gives a greater vertical surface for the stone to lock up against and thus more effectively transfer stresses from the stone to the grid. E’GRID is designed and manufactured to optimise this rib height.
E'GRID 3030 2.4mm
E'GRID 4040 3.2mm
Aperture area The greater the open area of the grid the more space is available for the stone to penetrate and interlock with the grid. E’GRID is designed and manufactured to optimise this open area.
E'GRID 3030 84%
E'GRID 4040 84%
Tensile load @ 2% strain (kN/m) This is a measure of the stiffness of the grid and therefore its ability to confine the soil at low strain (2%). The higher the load the better the grid can hold the soil together at the typically low strain conditions that exist under a load.
E'GRID 3030 11 x 11
E'GRID 4040 14.5 x 15
Tensile load @ 5% strain (kN/m) This is a measure of the stiffness of the grid and therefore its ability to confine the soil at low strain (5%). The higher the load the better the grid can hold the soil together at the typically low strain conditions that exist under a load.
E'GRID 3030 21.6 x 21.6
E'GRID 4040 28 x 29
Junction efficiency The junction efficiency (the junction’s strength compared with the tensile strength of the rib) of a biaxial geogrid is determined from the results of two tests developed by the Geosynthetics Research Institute, Philadelphia, USA. GRI GG1 measures the strength of an individual rib of the geogrid.GRI GG2 measures the shear strength of a pair of junctions on either side of a rib. The Junction Efficiency is the ratio of the mean GG2 test result to the mean GG1 test result. The higher the efficiency the better the grid will perform in retaining and interlocking.
E'GRID 3030 >/=95%
E'GRID 4040 >/=95%
Carbon black content Polypropylene in its natural form is subject to UV degradation. Carbon black is added to counter this.
E'GRID 3030 2%
E'GRID 4040 2%
Raw material Control of the raw material is essential to ensure consistent and controlled grid properties. It is more difficult to know the provenance and therefore the properties of externally sourced recyclate.
E'GRID 3030 Virgin PP and internally generated manufacture recyclate
E'GRID 4040 Virgin PP and internally generated manufacture recyclate
ISO 9001 certificate number ISO 9001 details the steps necessary to adopt a Quality Management System (QMS) in line with the International Standards Organisation (ISO). ISO 9001 is designed to help organisations ensure they meet the needs and expectations of both customers and other interested parties. Third party certification bodies offer independent confirmation that an organisation meets the requirements of the Standard. This is achieved through an auditing process that involves gathering evidence of conformance to the requirements of each clause of the standard.
E'GRID 3030 00617Q31529R5M
E'GRID 4040 00617Q31529R5M
CE mark FPC certificate number The CE mark is required for a grid to be sold legally in the EU from 1st July 2013. A declaration of performance for its regulated characteristics (defined in its harmonised standard) must be drawn up. The manufacturer, by drawing up his DoP, assumes the responsibility for the conformity of the grid with the declared performance. The application of the CE mark follows the DoP and effectively certifies that the manufacturer has strictly followed all the applicable procedures in drawing up his DoP and that, consequently, the DoP is accurate and reliable.
E'GRID 3030 0338 CPR 5400
E'GRID 4040 0338 CPR 5400

Related pages

Case study

£2.5M logistics project propped up with Geoworks geosynthetics

After surveys revealed ground that was too soft to build on, Alto Construct needed to call upon our geosynthetics expertise to recommend the right solution to complete the £2.5 million Newhall Road Distribution Centre.

Case study

30,000 homes powered cleanly after Geoworks intervention

The Sneddon Law Community Wind Farm in East Ayrshire, Scotland is set to deliver 15 wind turbines – each 130 metres tall from bottom to tip. However, before the project could get underway, we were brought in to help lay the groundwork.

Case study

Coming through in a pinch, Loft Lines Belfast

When a high-profile project in Belfast required some specialist civils assistance, we were on hand to help! The Loft Lines urban development in Belfast is set to transform a prime part of the city with a whole new way of life.

Related products

Stock code Description My Geoworks
GGC/COMBSX30/5.2X50 SX Composite 3030 composed of a thermally bonded SX Geogrid and Geotextile - 5.2m x 50m roll
GGC/COMBSX30/5.2X50 SX Composite 3030 composed of a thermally bonded SX Geogrid and Geotextile - 5.2m x 50m roll
GGEGRID/30 E'GRID 3030 Premium Biaxial Geogrid Polypropylene - 4m x 50m roll
GGEGRID/30 E'GRID 3030 Premium Biaxial Geogrid Polypropylene - 4m x 50m roll
GGEGRID/30L E'GRID 3030L Premium Biaxial Geogrid Polypropylene, large aperture - 4m x 50m roll
GGEGRID/30L E'GRID 3030L Premium Biaxial Geogrid Polypropylene, large aperture - 4m x 50m roll
GGEGRID/40 E'GRID 4040 Premium Biaxial Geogrid Polypropylene - 4m x 30m roll
GGEGRID/40 E'GRID 4040 Premium Biaxial Geogrid Polypropylene - 4m x 30m roll
GGEGRID/50R/1.3X50 E'GRID Uniaxial Geogrid HDPE - 1.3m x 50m roll
GGEGRID/50R/1.3X50 E'GRID Uniaxial Geogrid HDPE - 1.3m x 50m roll
GGEGRID/60R/1.3X50 E'GRID Uniaxial Geogrid HDPE - 1.3m x 50m roll
GGEGRID/60R/1.3X50 E'GRID Uniaxial Geogrid HDPE - 1.3m x 50m roll
GGEGRID/70R/1.3X50 E'GRID Uniaxial Geogrid HDPE - 1.3m x 50m roll
GGEGRID/70R/1.3X50 E'GRID Uniaxial Geogrid HDPE - 1.3m x 50m roll
GGEGRID/95R/1.3X50 E'GRID Uniaxial Geogrid HDPE - 1.3m x 50m roll
GGEGRID/95R/1.3X50 E'GRID Uniaxial Geogrid HDPE - 1.3m x 50m roll
GGSXGRID/20 SX Grid Biaxial Geogrid Polypropylene - 5.2m x 50m roll
GGSXGRID/20 SX Grid Biaxial Geogrid Polypropylene - 5.2m x 50m roll
GGSXGRID/30 SX Grid Biaxial Geogrid Polypropylene - 5.2m x 50m roll
GGSXGRID/30 SX Grid Biaxial Geogrid Polypropylene - 5.2m x 50m roll
Share this page